Robex Vt
Triple valve
Outstanding triple valve: ball valve, check valve and two side ports. Designed to give a solution to professional and industrial users who intend to have a single product rather than three different ones. It combines the characteristics of robustness and reliability of the Omega series with the reduced pressure drops of the Valstop series of check valves.
Watch the video on triple valve ROBEX VT
Material specification
Approved to EN 13828
|
COMPONENT |
MATERIAL |
DESCRIPTION |
||
|---|---|---|---|---|
| 1 | BODY | CW 617 N UNI EN 12165 | FORGED | |
| 2 | END ADAPTER | CW 617 N UNI EN 12165 | FORGED | |
| 3 | BALL | CW 614 N UNI EN 12164 | MACHINED, NICKEL-CHROME | |
| 4 | BALL GASKETS | P.T.F.E. | PURE | |
| 5 | STEM | CW 614 N UNI EN 12164 | MACHINED | |
| 6 | THRUST WASHER | P.T.F.E. | PURE | |
| 7 | O-RINGS | ELASTOMER | SUITABLE FOR USE WITH WATER | |
| 8 | HANDLE /T-HANDLE | AL UNI 5076 | PAINTED | |
| 9 | SELF-LOCKING NUT | 8G STEEL | ZINC-PLATED | |
| 10 | JUMPER GASKET | ELASTOMER | SUITABLE FOR USE WITH WATER | |
| 11 | JUMPER | POLYMERIC RESIN | MOLDED | |
| 12 | JUMPER GUIDE | POLYMERIC RESIN | MOLDED | |
| 13 | SPRING | STAINLESS STEEL AISI 302 | NORMALIZED | |
| 14 | CAPS | NYLON | MOLDED | |
| 15 | CAP GASKETS | ELASTOMER | SUITABLE FOR USE WITH WATER |
Characteristics
| END CONNECTIONS | Ends threaded to UNI ISO 228/1. |
| USES | Hydraulic systems with hot and cold water. Heating systems. Compressed air. Non-aggressive fluids compatible with the components of the valve. See the table of chemical resistance. |
| INSTALLATION POSITION |
ROBEX-VT triple valves can be installed in any position (vertical, horizontal, oblique). |
| WORKING PRESSURE | Min 0,05 bar (for check valves). From PN 40 (size 1/2”) to PN 16 (size 2”). See pressure/temperature diagram. |
| TEMPERATURE LIMITS | From -15°C to + 100°C. |
| CRACKING PRESSURE | Min 0,025 bar (25 cm water column). |
| CRACKING PRESSURE | Min 0,05 bar (50 cm water column). |
| ROBEX - VT TRIPLE VALVE | ROBEX-VT triple valves are the result of combining OMEGA ball valves, heavy full bore valves, VALSTOP check valves, heavy full bore valves with extremely reduced loss of head, and two plugged side outlets, one upstream and one downstream of the jumper. |
| NOTE | According to UNI EN 13828 in presence of water which could be aggressive for brass alloy, as agree with UNI EN ISO 6509 standard, is necessary the DZR brass alloy. The manufacture is available on request. |
Pressure/temperature diagram
(tested with water)
Loss of head diagram
(tested carried with water)
